Bunka Knife: Uses, Sizes and Steels
A bunka knife is a Japanese all-rounder with a mostly flat edge and an angled point called a K-tip. You push the tall blade forward and down through vegetables, herbs and boneless meat, and the tip handles scoring and trimming. ZAKU Knives stocks them from 80 to 180mm, in carbon and stainless steel.
This guide is for home cooks choosing a first bunka, or deciding between a bunka and a santoku, a flat-edged all-rounder for vegetables, meat and fish. If you already want a bunka, skip to length and steel.

What is a bunka knife?
A bunka is a Japanese kitchen knife with a wide, mostly flat blade and an angled tip. The name means culture, and you will also see it called the cultural kitchen knife (bunka bōchō).
The tip is called a K-tip or reverse tanto. The edge runs longer than the spine, the blunt top of the blade, and meets it at an angle of about 45 degrees, which gives a sharp point for fine work. Bunkas are usually double bevel, sharpened on both sides, so most work for left- and right-handed cooks.
What is a bunka used for?
A bunka handles most everyday prep: vegetables, herbs, boneless meat, poultry and fish. The flat edge does the chopping, and the tip does the detail work.
- Flat edge: slicing and dicing vegetables, chopping herbs, slicing chicken breast or pork.
- Tip: scoring mushroom caps, cutting garlic fine, trimming chicken thighs.
- Wide blade: scooping cut food off the board. Turn the blade and use the spine, not the edge.

How do you cut with a bunka?
Chop straight down, or push the blade forward and down. A bunka does not rock like a Western chef's knife, because its edge is too flat and the tip digs into the board.
- Tap chop: lift the blade and bring it straight down, for herbs and garlic.
- Push chop: push into the food at an angle and finish with a short slide forward along the board.
- Tip slice: for tomatoes and cucumbers, raise the handle so only the tip touches the board, then pull back. Less blade goes through the food, so slices stick to it less.
Bunka vs santoku, nakiri and gyuto: which should you get?
A bunka is closest to the santoku and does the same jobs, with an angled point where the santoku has a rounded tip. Two other Japanese knife types differ more.
A nakiri is a square vegetable knife. A gyuto is the Japanese chef's knife, with a longer blade and an edge that curves up toward the tip.
| Bunka | Santoku | Nakiri | Gyuto | |
|---|---|---|---|---|
| Edge | Mostly flat | Mostly flat, curves up near the tip | Straight and flat | Flat near the handle, then a gentle curve up to the tip |
| Tip | Angled K-tip | Rounded drop to a point | Square | Point |
| Best at | Vegetables, herbs, boneless meat, tip work | Vegetables, meat and fish | Vegetables, push cuts | Most jobs, from onions to slicing meat |
| Our lengths | 80 to 180mm | 150 to 180mm | 120 to 180mm | 180 to 220mm |
If you cut mostly vegetables, a nakiri is built for that one job. If you want one knife for vegetables and boneless meat, both a bunka and a santoku do the job. Pick the bunka for its angled point, which reaches into scoring and trimming work. If you often slice wide food, a gyuto crosses it in one stroke.

For the other Japanese shapes, see our guide to Japanese knife types.
How is a bunka different from a kiritsuke or a chef's knife?
A kiritsuke has the same angled tip on a longer blade. Many Western chef's knives have a more curved edge, so they rock on the board where a bunka chops and pushes.
Our kiritsukes are 210 and 240mm, against 80 to 180mm for our bunkas. The traditional kiritsuke is single bevel, sharpened on one side only, and takes practice. Many sold today are double bevel.
Traditional German-style chef's knives are often thicker and heavier than a bunka of the same length.
Which length and steel should you choose?
Choose the length first, because in our range it also decides carbon or stainless. Our stainless bunkas are all 180mm, and the shorter ones are carbon steel.
Steel decides how much care the blade needs:
- Blue Steel #2 (Aogami #2) is a carbon steel. It rusts if you leave it wet, so wipe and dry it right after use. Ours have a kurouchi finish, the black forge finish left on the blade.
- Blue Super is also a carbon steel. One of our 165mm bunkas uses it, with a damascus finish, a layered pattern around a core.
- Ginsan is stainless and the easier-care option. Still wash it by hand and dry it. Three of ours have a mirror polish.
| Length | Bunkas online | Steel and finish |
|---|---|---|
| 80mm | 3 | Blue Steel #2, kurouchi |
| 120mm | 2 | Blue Steel #2, kurouchi |
| 165mm | 6 | Blue Steel #2 kurouchi (5), Blue Super damascus (1) |
| 180mm | 5 | Ginsan: mirror polish (3), plain (1), damascus (1) |

Our 80 and 120mm bunkas are short prep knives, easier to handle on a small board.
We list 16 bunkas online. See all bunka knives and current prices.
How do you care for a bunka?
Hand-wash it, dry it at once and store it in a sheath or on a magnetic strip. Never put it in a dishwasher, and cut on wood or soft plastic.
Do not twist or scrape with the edge, and keep it away from bones and frozen food, because the hard, thin edge can chip. Carbon steel like Blue Steel #2 slowly turns a dull grey on the surface. That patina is normal.
Sharpen it on a sharpening stone and follow the angle already ground on each side. Carry each stroke all the way through the K-tip, so the point keeps its shape and does not wear round.
Where can you try a bunka in Tokyo or Kyoto?
All four of our stores stock bunkas and offer test cutting: Kappabashi, Asakusa and Harajuku in Tokyo, and Nishiki in Kyoto. You cut a daikon radish at the counter, so you can feel the flat edge and the K-tip before you choose.
Find a store. Outside Japan, you can order online.
Frequently asked questions
Should I get a bunka or a nakiri?
A nakiri if you cut mostly vegetables. A bunka if you also cut boneless meat and fish and want a point for trimming and scoring.
Should I get a gyuto or a bunka?
A bunka if you cook on a small board and cut mostly vegetables and boneless meat. Its shorter blade is easier to steer. A gyuto if you often slice large food, like a roast or a whole cabbage, because the longer blade crosses it in one stroke.
What is a ko-bunka?
Ko means small in Japanese. A ko-bunka is a short bunka of about 5 inches (130mm), used as a prep knife for trimming, peeling and fine cuts. Our 80 and 120mm bunkas are shorter still and do the same jobs.