Kiritsuke Knife: What It Is and How to Choose
A kiritsuke knife is a long Japanese kitchen knife with a nearly flat edge and an angled tip, called a K-tip. You push it through vegetables, draw it through boneless meat and fish, and use the tip for scoring and trimming. ZAKU Knives stocks them in 210mm and 240mm, in SG2 and VG10 stainless steel.
This guide is for home cooks who like the look of a kiritsuke and want to know whether it suits their kitchen. If you already want one, skip to length and steel.

What is a kiritsuke knife used for?
A kiritsuke covers most everyday prep, from onions to fish fillets. The long, flat edge does the slicing, and the angled tip does the detail work.
- Even slices: cucumber, cabbage, onion and daikon come out the same thickness across the pile.
- Long single strokes: a 240mm blade takes a slice off boneless meat or a fish fillet in one pull, so the cut face stays clean.
- Tip work: scoring fish skin, trimming silverskin, splitting a chilli.

Keep it away from bones, frozen food and anything you would have to force. The edge is thin and hard, so it chips under that kind of load. Use a heavy bone cleaver for bones, and thaw frozen food before you cut it.
How do you use a kiritsuke knife?
Push it forward and down through the food, or draw it back toward you in one long stroke, keeping the edge level with the board.
A kiritsuke does not rock like a Western chef's knife, because its edge has almost no curve to roll on.
- Curl the fingers of your guiding hand and rest the flat of the blade against your knuckles.
- Set the edge on the food and push forward and down in one stroke. For fish or boneless meat, start near the heel, the end of the edge nearest the handle, and pull the blade back toward you in one long stroke.
- Lift the blade and move your guiding hand back for the next cut.
- For scoring or trimming, lift the handle slightly so only the tip touches the food.
If you rock-chop today, the push cut takes some practice. At our stores you can try it on a daikon before you buy.
Is a kiritsuke hard to use?
That depends on the bevel, which is how the edge is sharpened. A double-bevel kiritsuke is sharpened on both sides and handles like a chef's knife, so it is no harder to use than a chef's knife.
A single-bevel kiritsuke is sharpened on one side only, like a chisel. It steers slightly to one side as it moves through food. It is made for one hand, right or left, and it takes real practice. The kiritsuke's reputation as a difficult knife comes from this version.

The traditional kiritsuke is single bevel. It combines two single-bevel knives. One is the yanagiba, a long slicer for raw fish. The other is the usuba, a flat-edged vegetable knife. In Japanese restaurant kitchens the kiritsuke is traditionally associated with the head chef. Most kiritsuke sold today are double bevel.
You will also see the names "kiritsuke-gyuto" and "K-tip gyuto" for a gyuto, the Japanese chef's knife, with a K-tip. Shops use these names and "double-bevel kiritsuke" for overlapping shapes, and the curve of the edge varies by model. Compare the edge line of the actual knife rather than the name.
Ask us which bevel a kiritsuke has before you order, or test-cut it in store. Our guide to single vs double bevel knives explains the difference in more detail.
Kiritsuke vs gyuto and bunka: what's the difference?
They differ in the edge line and the tip. A kiritsuke is long, with a nearly flat edge and an angled K-tip.
A gyuto's edge curves up to a pointed tip, so it rocks as well as push-cuts. A bunka has the same angled K-tip on a shorter blade.

| Kiritsuke | Gyuto | Bunka | |
|---|---|---|---|
| Edge | Nearly flat | Curves up to the tip | Gentle curve up to the K-tip |
| Tip | Angled K-tip | Pointed | Angled K-tip |
| Cut | Push and pull | Rock and push | Push |
| Best for | Long slices, vegetables, boneless meat and fish | Most jobs, rocking herbs and garlic | The same jobs on a smaller board |
If you rock-chop herbs and garlic, a gyuto suits you better. A kiritsuke suits push cutting and gives you a long blade with a tip you can see while you work. A bunka puts that tip on a shorter blade for a smaller board.
At the counter we lay a kiritsuke, a gyuto and a bunka side by side so you can compare the tip and the edge line in your hand. Visitors who like the kiritsuke tip but find 240mm long for their board often try a 210mm or a bunka next. Our gyuto guide covers the chef's-knife side of the choice.
If you mostly cut vegetables, look at a nakiri too. A nakiri is a square blade with a flat edge, made for vegetables. Our nakiri guide covers it. For every other shape, see Japanese knife types.
Which length and steel should you choose?
Choose 210mm if your board is small or you are new to long knives. Choose 240mm if you have room and slice a lot of fish or boneless meat.
- 210mm is easier to control on a home board. Our range includes 210mm models in VG10 and SG2. Check the product pages for current availability.
- 240mm gives longer single strokes. Our 240mm kiritsuke use SG2.
VG10 and SG2 are both stainless steels, so they need less upkeep than carbon steel. Still wash them by hand and dry them straight away. Our guide to Japanese knife steels compares them.
Every kiritsuke in our range has a damascus finish, a layered steel pattern around a core. The pattern is the look, and the core does the cutting. Handles are ebony, olive wood, or wenge with black buffalo horn.
See our kiritsuke knives for the current range, prices and availability.
How do you care for a kiritsuke?
Wash it by hand with mild soap, dry it straight away and store it in a sheath or on a magnetic strip. Never put it in a dishwasher, and cut on wood or soft plastic, never on glass or stone.
Watch the tip. It is the part most likely to chip if the knife is dropped or used to pry something open.
A single-bevel kiritsuke needs a whetstone and some practice to sharpen. A double-bevel kiritsuke sharpens on both sides, the same way as a gyuto.
Where can you try a kiritsuke in Tokyo or Kyoto?
All four of our stores have kiritsuke out for test cutting: Kappabashi, Asakusa and Harajuku in Tokyo, and Nishiki Market in Kyoto. Hold a 210mm and a 240mm side by side, cut a daikon with each, and keep the one that suits your board.
Our staff speak several languages, so ask them about the bevel and care while you are there. Find a store.
Frequently asked questions
What do you use a kiritsuke knife for?
Vegetables, boneless meat and fish. The flat edge push-cuts even slices, the length gives one-stroke slices through fillets, and the angled tip scores skin and trims. Keep it away from bones and frozen food.
What is the difference between a bunka and a kiritsuke?
Both have the angled K-tip. A bunka is shorter and a little taller, so it suits a small board. A kiritsuke is longer and slices fish and meat in one stroke.
Why is a kiritsuke knife difficult to use?
Its reputation comes from the traditional single-bevel kiritsuke, which is sharpened on one side, steers in the cut and is made for one hand. A double-bevel kiritsuke is no harder than a chef's knife. The main change is push cutting instead of rocking.
Can a kiritsuke be your everyday knife?
Yes, if it is double bevel and the length fits your board. It covers vegetables, boneless meat and fish. If you rock-chop herbs every day, a gyuto suits you better.