ZAKU® Knives 2026 Made in Japan.

Japanese Knife Finishes: Tsuchime, Damascus and Kurouchi

Tsuchime (槌目) is a hammered finish on a Japanese knife: small dimples that help wet slices fall away. Damascus is a pattern of layered steel, often wrapped around a cutting core, and kurouchi is the dark forge scale left on the upper blade. The finish changes the look and the price; the steel decides the edge and the care.

This guide is for home cooks choosing between finishes on their first or next Japanese knife. If you are still choosing a shape, start with our guide to Japanese knife types.

A damascus santoku, a kurouchi nakiri and a kurouchi tsuchime gyuto side by side on a dark surface
Left to right: damascus, kurouchi, and kurouchi with tsuchime.

What is tsuchime?

Tsuchime (槌目) means "hammer marks": a blade face covered in small, shallow dimples. The dimples sit on the upper part of the blade, and the edge itself is ground smooth.

Some makers hammer the pattern by hand and others press it by machine. On most tsuchime knives the hammered layer is the outer cladding of a three-layer blade, with a harder steel core that forms the edge. That is why tsuchime appears on many different steels.

The five knives in our tsuchime collection are all Molybdenum stainless steel, with the hammered dimples inside a black kurouchi band along the spine and the lower blade ground bright: three nakiri (square vegetable knives) and two 210mm gyuto (the Japanese chef's knife). Hammered blades also turn up in other collections: the Ripple nakiri, the Ripple kiritsuke (an angled-tip blade) and the Wa Hammer petty have hammered dimples over a damascus pattern. See our tsuchime knives and current prices.

Does a hammered blade stop food from sticking?

It helps a little, mostly with wet or starchy food.

A slice of potato or cucumber lies flat on a polished blade and clings to the film of water between them. On a tsuchime blade the slice touches the ridges between the dimples, so air gets in and the slice drops away sooner.

Cross-section diagram: a potato slice lies flat against a polished blade face and sticks, while on a tsuchime blade it touches only the ridges, with air gaps in the hammered dimples
Seen end-on: on a tsuchime blade a wet slice touches only the ridges between the dimples.

The effect varies with the food and the knife. The blade's shape, thickness and grind do more for food release than the finish does. A thin blade with a hammered face will still carry the odd slice up the side.

You notice it most on a pile of thin potato or cucumber rounds.

Thin raw potato slices and cucumber rounds laid out in two overlapping rows on a dark walnut cutting board
Thin, wet slices like these are where a hammered finish helps most.

What is a damascus knife?

A damascus knife has a blade made of many layers of steel, forged together and etched so the layers show as a wavy pattern. Many Japanese damascus kitchen knives have the patterned layers as cladding around a separate cutting core, and that core forms the edge.

Read the core steel in the product name before you look at the pattern. Our 42 damascus knives use VG10 (25), SG2 (6), Ginsan (4), SLD (2), and a few Molybdenum, Blue Steel #2 and Blue Super cores. Damascus spans the widest price range of the three finishes: our most expensive damascus costs about four times our least expensive one, and most sit near the lower end. See our damascus knives and current prices.

Care follows the core steel. A VG10 or SG2 damascus is stainless: wash by hand and dry. A Blue Super or Blue Steel #2 damascus is carbon steel and rusts if left wet.

What is a kurouchi finish?

Kurouchi (黒打ち) is the black scale left on the blade from forging. The maker grinds and polishes only the lower part of the blade to the edge, so the upper blade stays dark and rough, and the bright line between the two shows where the grind stops.

Our kurouchi knives are mostly carbon steel: 24 of 32 are Blue Steel #2 (Aogami #2). It rusts if you leave it wet, so wipe and dry it right after use. They come as bunka (an all-rounder with an angled tip), nakiri, santoku, gyuto and petty (a small knife for fruit and herbs), from 80 to 220mm, and kurouchi is where our prices start lowest. See our kurouchi knives and current prices.

The black scale wears slowly with use and scrubbing, and the bright lower blade turns grey with a patina over time, which is normal on carbon steel. Skip abrasive pads on the dark part if you want the black to last.

Tsuchime vs damascus vs kurouchi: which should you choose?

Pick the steel and shape first, then the finish that suits how you cook and how much care you want to give.

Scroll sideways to see the whole table →
Tsuchime Damascus Kurouchi
What you see Hammered dimples Wavy layered pattern Black forge scale above a bright edge
Food release Slightly better on wet, starchy food Depends on the blade (hammered ones help a little) Depends on the blade (hammered ones help a little)
Care Follows the core steel Follows the core steel Mostly carbon steel: wipe dry as you cook
Our range online 5 knives, a narrow band near the low end 42 knives, the widest price range 32 knives, our lowest starting prices
  • You cut a lot of potatoes and cucumbers: tsuchime.
  • You want stainless steel with a pattern you will look at every day: VG10 or SG2 damascus.
  • You want carbon steel and a raw, dark look at a lower price: kurouchi.

Whichever finish you pick, hold the knife before you buy if you can. A handle that fits your grip matters more over a long prep session than the pattern on the blade.

Two santoku knives side by side on dark stone: left, a black kurouchi blade with an octagonal olive wood wa handle; right, a polished blade with a riveted Western handle in blue acrystone
Left: an octagonal olive wood wa handle (Sumi santoku). Right: a riveted Western handle (Ember santoku).

Which knife shapes come in each finish?

Shape comes first, so check which finish your shape comes in. This table counts the knives in each of our three finish collections online:

Scroll sideways to see the whole table →
Shape Tsuchime Damascus Kurouchi
Santoku (none) 12 6
Gyuto 2 11 4
Nakiri 3 3 8
Bunka (none) 2 10
Petty (none) 7 4
Kiritsuke (none) 5 (none)

The damascus collection also has one yanagiba and one deba. The five tsuchime knives are kurouchi tsuchime, so they are counted under kurouchi too. The Ripple nakiri, Ripple kiritsuke and Wa Hammer petty are hammered as well but sit in the damascus collection.

A santoku, the shorter all-rounder that is a common first Japanese knife, sits in our damascus and kurouchi collections. A nakiri sits in all three. Our guides to the santoku, gyuto and nakiri help you pick the shape.

You will also see nashiji (a matte, pear-skin texture) and migaki (a polished blade) on Japanese knives. They change the look, and the edge still comes from the steel.

Does the finish change how sharp a knife is?

No. The surface finish does not decide how sharp the edge is: that comes from the steel, its hardness and the edge the blade is ground to.

The finish can still change how food comes off the blade, as the hammered section above shows.

The finish barely matters when you sharpen, because the edge bevel is ground clean on every finish. Sharpening on a whetstone can scuff the area just above the edge, and on a damascus blade that can dull the pattern there. Our guide to Japanese knife steels covers what each core steel does.

Try the finishes in Tokyo or Kyoto

All four ZAKU Knives stores have tsuchime, damascus and kurouchi knives out for test cutting: Kappabashi, Asakusa and Harajuku in Tokyo, and Nishiki Market in Kyoto. Cut a few rounds of daikon with a tsuchime nakiri and then a kurouchi nakiri without dimples, and watch how the slices come off each blade.

Find a store. Outside Japan, order online and compare by steel and finish on each product page.

Frequently asked questions

What does tsuchime mean?

Tsuchime (槌目) is Japanese for "hammer marks". On a knife it means a hammered finish: rows of small dimples on the blade face.

What is a damascus knife?

A knife whose blade shows a wavy pattern from many layers of steel forged together. On many Japanese damascus kitchen knives the layers wrap a separate core steel, which forms the edge.

Does a kurouchi finish rust?

It can. Most of our kurouchi knives are carbon steel, so the bright lower blade and the edge rust if left wet. Wipe and dry the knife while you cook.

Is a hammered knife better than a non-hammered one?

Only for food release, and only a little. A hammered finish helps wet, starchy slices fall away. It does not make the edge sharper.